Description

Ardex X32 fastener (fix) for most of our stones.

Calculate:

about 3,3 kg / sqm with thin bed method and 8x8x8 mm comb
The calculations are very individual depending on how much the craftsman wants to put in and should be seen as a recommendation. The calculation even requires the basis.

Product Description

- Cement based with ARDURAPID effect.
- Hardening with full water bonding.
- For laying of natural stone, cement stone, slate and granite ceramics.
- Used for plates with varying thickness.
- Prevents discoloration and deposits.
- Water repellent and weather resistant.

Indoor and outdoor.

Area of ​​use

For mounting natural stone such as marble, jam marble, granite, quartzite, slate, and tiles, terracotta, granite ceramics and the like.

For mounting of Calibrated natural stone made with the thin bed method with a toothpaste with a tooth size of at least 8 mm.

For laying of calibrated and uncalibrated natural stone made in the medium bed method in layer thicknesses between 5 and 20 mm.

For laying of large natural stone slabs of varying thickness with the thick bed method in layer thicknesses between 10 and 30 mm.

For flushing on walls and floors before installation of tiles, tiles and natural stone.
On concrete and masonry (cementputs) older than 3 months.

TECHNICAL DATA


consistency Smooth, creamy, plastic.
Consumables For smooth surfaces: Approx. 3,3 kg / m² powder at comb size 8x8x8 mm.
In the medium or thick bed method: Approx. 1,2 kg powder / m² and mm.
Working time Approx. 1 hr at 20 ° C.
bedtime About 20 min at 20 ° C.
Fitting (floor) After about 3 hr at 20 ° C.
Fitting (wall) After about 3 hr at 20 ° C.

Reviews

No product reviews yet.

Be the first to review "Ardex X32 Fastener"

Your email address will not be published. Required fields are marked *